Barebones AVR dev. board

12,00 EUR

inkl. 19 % MwSt zzgl. Versandkosten

Lieferzeit: Gewöhnlich versandfertig in 24 Stunden

Kein Lagerbestand

Kein Lagerbestand

0 Bewertung(en) | Bewertung schreiben

Art.Nr.: AF174
Kein Lagerbestand

We took the business-card-sized AVR target board from Evil Mad Scientist Laboratories and added a few components to make an AVR dev board that has only the bare minimums!

Comes unassembled with:

  • Printed circuit board
  • Blank ATMEGA328 with internal 1 MHz oscillator selected (default)
  • 28-DIP socket
  • 6-pin ISP AVR programming header
  • 0.1uF ceramic capacitor
  • 5mm diffused red LED
  • Resistor for LED
 

To get you started, here is a 'hello world' zip file. It contains a C program, compiled .hex file and Makefile for a blinking LED connected to pin PB5. Wire up the board as shown here (don't forget the 3 jumper wires up top, they are essential!) Then install WinAVR or equivalent and run make program in the uncompressed folder to compile and burn the example.

Can easily be turned into a 'Minimal Arduino', simply follow the instructions from TodBot (You'll need a programmer like a USBtinyISP or similar to burn the bootloader onto it)

  • Dimensions (PCB only): 3.5" x 2" x 0.03" (89mm x 51mm x 1mm)
  • Dimensions (assembled): 3.5" x 2" x 0.6" (89mm x 51mm x 15mm)
  • Weight: 15g (0.5oz)




Kunden kauften auch

Jumper Wires M/F 300mm yellow
0,37 EUR - 0,31 EUR
Breadboard durchsichtig
3,90 EUR
Jumper Wires M/F 300mm red
0,37 EUR - 0,31 EUR
Saleae Extra Test Clip (1 Clip)
2,65 EUR - 2,50 EUR
DS1077 Programmable Oscillator Breakout - 16.2kHz to 133MHz
3,95 EUR
Jumper Wires M/F 300mm green
0,37 EUR - 0,31 EUR