Electronic Brick

ELECTRONIC BRICK - ROTARY POTENTIOMETER BRICK

ELECTRONIC BRICK - ROTARY POTENTIOMETER BRICK

The potentiometer brick produces analog output between 0 and Vcc (5V DC with Seeeduino) on its D1 connector. The D2 connector is not used. The angular range is 300 degrees with a linear change in value. The resistance value is 10k ohms, perfect for Arduino use. This may also be known as a rotary angle sensor.

2,50 EUR

inkl. 19 % MwSt zzgl. Versandkosten

Gewicht: 0.0250 KG

Lieferzeit: Gewöhnlich versandfertig in 24 Stunden

Lagernd

Lagernd

 ELECTRONIC BRICK - DS1307 REAL TIME CLOCK BRICK

ELECTRONIC BRICK - DS1307 REAL TIME CLOCK BRICK

This is a electronic brick based on the clock chip DS1307 which supports the I2C protocol. It uses a Lithium cell battery (CR1225). The clock/calendar provides seconds, minutes, hours, day, date,month, and year information.

4,00 EUR

inkl. 19 % MwSt zzgl. Versandkosten

Gewicht: 0.0200 KG

Lieferzeit: Gewöhnlich versandfertig in 24 Stunden

Geringer Lagerbestand

Geringer Lagerbestand

JOYSTICK BREAKOUT MODULE

JOYSTICK BREAKOUT MODULE

The joystick on this module is very similar to the 'analog' joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometers - one for each axis. Pots are ~10k each. This joystick also has a select button that is actuated when the joystick is pressed down. There are 5 pins on board: VCC, GND, X, Y and Button. Connect the module with 5V power suppy with VCC and GND, you can read out the joystick status by X,Y and button pins.

4,50 EUR

inkl. 19 % MwSt zzgl. Versandkosten

Gewicht: 0.0200 KG

Lieferzeit: Gewöhnlich versandfertig in 24 Stunden

Kein Lagerbestand

Kein Lagerbestand

Kein Lagerbestand
2 CHANNELS 5V RELAY MODULE

2 CHANNELS 5V RELAY MODULE

This is a 5V 2-Channels Relay module, It can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and MSP430.
2 relays are included in this module, with “NC” ports means “Normally connected to COM” and “NO” ports means “Normally open to COM”. This module also equipped with 2 LEDS to show the status of relays.

7,50 EUR

inkl. 19 % MwSt zzgl. Versandkosten

Gewicht: 0.0040 KG

Lieferzeit: Gewöhnlich versandfertig in 24 Stunden

Kein Lagerbestand

Kein Lagerbestand

Kein Lagerbestand
Electronic Brick - PIR Sensor Brick

Electronic Brick - PIR Sensor Brick

This is a simple to use PIR motion sensor with electronic brick  interface. Simply connect it to Stem shield and program it, when anyone moves in its detecting range, the sensor outputs HIGH on its S pin.  

7,50 EUR

inkl. 19 % MwSt zzgl. Versandkosten

Lieferzeit: Gewöhnlich versandfertig in 24 Stunden

Kein Lagerbestand

Kein Lagerbestand

Kein Lagerbestand
Electronic Brick - MQ - 2 Gas Sensor Brick

Electronic Brick - MQ - 2 Gas Sensor Brick

This MQ-2 sensor brick includes a MQ-2 Gas sensor. Gas Sensor(MQ2) module is useful for detecting gas leakage.

3,95 EUR

inkl. 19 % MwSt zzgl. Versandkosten

Lieferzeit: Gewöhnlich versandfertig in 24 Stunden

Geringer Lagerbestand

Geringer Lagerbestand

Electronic Brick - Magnetic Sensor/Switch Brick

Electronic Brick - Magnetic Sensor/Switch Brick

This is a Electronic Brick interface compatible Magnetic switch module.

2,85 EUR

inkl. 19 % MwSt zzgl. Versandkosten

Lieferzeit: Gewöhnlich versandfertig in 24 Stunden

Lagernd

Lagernd

Electronic Brick - Light Sensor Brick

Electronic Brick - Light Sensor Brick

The Light sensor module uses the photoresistor to detect the light intensity of the environment.

2,85 EUR

inkl. 19 % MwSt zzgl. Versandkosten

Lieferzeit: Gewöhnlich versandfertig in 24 Stunden

Kein Lagerbestand

Kein Lagerbestand

Kein Lagerbestand
Electronic Brick - DHT11 Humidity Temperature Sensor Brick

Electronic Brick - DHT11 Humidity Temperature Sensor Brick

This temperature & humidity sensor provides a pre-calibrated digital output. A unique capacitive sensor element measures relative humidity and the temperature is measured by a negative temperature coefficient (NTC) thermistor.

4,95 EUR

inkl. 19 % MwSt zzgl. Versandkosten

Lieferzeit: Gewöhnlich versandfertig in 24 Stunden

Geringer Lagerbestand

Geringer Lagerbestand

Electronic Brick - ACS712 Current Sensor Brick

Electronic Brick - ACS712 Current Sensor Brick

This is a brick with the fully integrated Hall Effect that based linear ACS712 current sensor.

9,50 EUR

inkl. 19 % MwSt zzgl. Versandkosten

Lieferzeit: Gewöhnlich versandfertig in 24 Stunden

Kein Lagerbestand

Kein Lagerbestand

Kein Lagerbestand
Electronic Brick - DS18B20 1 - Wire Digital Thermometer Module

Electronic Brick - DS18B20 1 - Wire Digital Thermometer Module

This brick uses the DS18B20 1-Wire digital temperature sensor from Maxim IC. It can report degrees C with 9 to 12-bit precision, -55C to 125C (+/-0.5C).

3,95 EUR

inkl. 19 % MwSt zzgl. Versandkosten

Lieferzeit: Gewöhnlich versandfertig in 24 Stunden

Kein Lagerbestand

Kein Lagerbestand

Kein Lagerbestand
Electronic Brick - DS1307 Real Time Clock Brick

Electronic Brick - DS1307 Real Time Clock Brick

This is a electronic brick based on the clock chip DS1307 which supports the I2C protocol. It uses a Lithium cell battery (CR1225). The clock/calendar provides seconds, minutes, hours, day, date,month, and year information.

4,00 EUR

inkl. 19 % MwSt zzgl. Versandkosten

Lieferzeit: Gewöhnlich versandfertig in 24 Stunden

Kein Lagerbestand

Kein Lagerbestand

Kein Lagerbestand
Electronic Brick - Hunt/Track Sensor (Base on TCRT5000)

Electronic Brick - Hunt/Track Sensor (Base on TCRT5000)

This is a Hunt / Track sensor base on Reflective Optical Sensor TCRT5000.

5,45 EUR

inkl. 19 % MwSt zzgl. Versandkosten

Lieferzeit: Gewöhnlich versandfertig in 24 Stunden

Geringer Lagerbestand

Geringer Lagerbestand

Electronic Brick - HC06 Serial Bluetooth Brick

Electronic Brick - HC06 Serial Bluetooth Brick

This Serial Bluetooth brick is easy to use module compatible with existing Stem Basic Shield. It designs for transparent wireless serial connection setup.

11,95 EUR

inkl. 19 % MwSt zzgl. Versandkosten

Lieferzeit: Gewöhnlich versandfertig in 24 Stunden

Kein Lagerbestand

Kein Lagerbestand

Kein Lagerbestand
Electronic Brick - Touch Sensor/Button Brick

Electronic Brick - Touch Sensor/Button Brick

This is a simple touch sensor / button brick. You can use it to replace a traditional push button. and add some cool element to your project
 

2,85 EUR

inkl. 19 % MwSt zzgl. Versandkosten

Lieferzeit: Gewöhnlich versandfertig in 24 Stunden

Geringer Lagerbestand

Geringer Lagerbestand

Electronic Brick - Big Button

Electronic Brick - Big Button

A simple obvious button that fits finger pad rather than nails.

1,50 EUR

inkl. 19 % MwSt zzgl. Versandkosten

Lieferzeit: Gewöhnlich versandfertig in 24 Stunden

Kein Lagerbestand

Kein Lagerbestand

Kein Lagerbestand
Electronic Brick - Lightning Emitting Diode (LED)

Electronic Brick - Lightning Emitting Diode (LED)

A general purpose LED module with Electronic Brick interface, easily to use with other Electronic Brick and add a indicator into your project.

1,50 EUR

inkl. 19 % MwSt zzgl. Versandkosten

Lieferzeit: Gewöhnlich versandfertig in 24 Stunden

Geringer Lagerbestand

Geringer Lagerbestand

Electronic Brick - Buzzer

Electronic Brick - Buzzer

This is a simple yet enjoyable electronic brick to use. The piezo can be connected to digital outputs, and will emit a tone when the output is high. Alternatively it can be connected to an analog pulse-width modulation output to generate various tones and effects.

1,50 EUR

inkl. 19 % MwSt zzgl. Versandkosten

Lieferzeit: Gewöhnlich versandfertig in 24 Stunden

Kein Lagerbestand

Kein Lagerbestand

Kein Lagerbestand